Connections - Gorgy Timing LEDI 1S Mode D'emploi

All necessary connections are made at the back of the case
► Connect the unit to power supply 230vAC 50-60HZ
► Connect the pulse or synchronisation input (AFnor,ntp, tDF,DCF or SMptE code)
► timer (optional)
► Connect pip outputs (optional)
► ASCII (optional)
For a 24v supply, the 4 pin plug is connected as shown (1=+24vdc 4=GnD)
ASCII
Face arrière ledi 2/S
rear side of the LEDI 2S
Cable 230 vAC power supply option : use a cable with En 60320/C19 type plug.
☛
NTP version is available only in LEDI 1 / S rack dimensions 424 x 141 in
20
230vAC
Chrono
+
DC
1
DC power supply
-
DC
GnD
230VaC; 0.02a; 50-60Hz
this case, the ASCII option is not available.
CoDE
Bp1 Bp2
ntp
2.

COnnECtIOnS

pip
output
MDE-LEDI1S-2S-1066V1.0