Electrical Connection - Angelo Po 191TPE Manuel D'utilisation Et D'installation

ELECTRICAL CONNECTION

Important
The connection must be made by author-
ised, skilled personnel, in accordance with
the relevant legal requirements, using ap-
propriate and specified materials.
The appliance is supplied with operating
voltage 400V/3N, which cannot be switched
to other values.
Specify the correct voltage for your device;
it cannot be modified after purchase.
Caution - warning
Before doing any work, cut off the mains elec-
tricity supply.
IT
GB
DE
FR
ES
English
Connect the appliance to the mains electricity sup-
ply as follows.
When connecting, take care to connect the
neutral and earth lines.
A
B
C
- 18 -
1 - If not already present, install a circuit-breaker
(A) with overload cutout and differential safety
breaker close to the appliance.
2 - Undo the screws (B) and remove the guard (C).
3 - Connect the circuit-breaker (A) to the terminal
board (D) of the appliance as shown in the dia-
gram and in the electrical system diagram at
the back of the manual.
Use a flexible cable with at least type H07RN-F
characteristics, rated for an operating tempera-
ture of at least 80° C.
Important
4 - Replace the guard (D) on completion of the
operation.
B
B
D
IDM-39617101500.tif