Safety And Information Signs; Optional Accessories - Angelo Po 191TPE Manuel D'utilisation Et D'installation

SAFETY AND INFORMATION SIGNS

The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: read the manual carefully be-
fore carrying out any procedure.
E)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
F) General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
G)CE marking: indicates that the appliance is com-
pliant with the relevant norms.

OPTIONAL ACCESSORIES

The appliance can be equipped with the following
accessories on request.
A)Feet
B)Hatches (PB9)
C)"Over cupboard "installation kit" (see page pag.
17)
D)"Bridge" installation kit (see pag. 17)
E)Supporting beam kit (see pag. 17)
A
H
H)WEEE symbol: indicates that the appliance is
subject to specific waste disposal regula-
tions.
- 5 -
F
E B
C
G
IDM-39617100300.tif
A
B
IDM-39616100500.tif
D
IT
GB
DE
FR
ES
English