Angelo Po 191TPE Manuel D'utilisation Et D'installation page 32

– Press the key (3 times) to switch on all the hea-
ting elements together (see attached wiring dia-
grams). The heating element lights (L1-L2-L3)
come on.
3 - Press the keys (B-C) to increase or decrease
the cooking temperature.
Important
Preheating is automatically disabled if the
temperature set is above the default tempe-
rature.
The cooking temperature set will appear in red
on the display (E).
When the temperature set is reached, the tem-
perature appears in green on the display ((E)).
Stopping
1 - Press the key (A) to stop the cooking
cycle.
Note: the appliance switches to standby
mode, meaning that the user can repro-
gram the circuit board and start a new coo-
king cycle.
IT
IT
GB GB
DE DE
FR FR
ES
ES
English
D
E
L1
2 - Keep the key (A) pressed for about 6 seconds
to switch the appliance off. The mains light (M)
comes on.
3 - Turn off the appliance's circuit breaker to di-
sconnect it from the electrical mains.
- 10 -
A B C
IDM-39617100500_1.tif
L2
M
L3