Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TELEVISION
Set main switch to «View/TV». To project photos and videos
on a TV screen, use the video cable (supplied) and plug in TV/
OUT port of the camera to video IN of TV set. Viewing screen
menu will also appear on TV screen. Turn OFF your camera
and select «TV/OUT». Plug the supplied video cable from the
camera to your television and turn «ON» the camera. You will
see the latest picture taken by your system. To change pictures
use «UP» or «DOWN» keys. When you push «MENU», you
can delete one picture, «DELETE ALL» picture or «FORMAT»
the SD card. Press «OK» to confirm.
TROUBLESHOOTING
No person / animal on photos
1.
Rising sun can trigger sensor.
oriented.
2.
At night, motion detector may detect beyond range of the
IR Illumination. Reduce distance setting.
3.
Small animal may be triggering unit. Reduce distance
setting and/or raise height of camera.
4.
Motion detector may sense animals through foliage.
5.
If person/animal moves quickly, it may move out of
camera field of view before photo is taken. Move camera
further back or redirect camera. Camera must be set on a
stable and immovable object. i.e. large tree.
6.
Make sure the mounting post or tree is stable and doesn't
move.
Red light in front of camera blinks
1.
Main mode switch is in test mode.
2.
Main mode switch is in Photo or Video mode. Red light
blinks during 60 sec. allowing the operator to walk away
from camera.
Camera must be re-
7
Publicité
Table des Matières
