Safety - Zehnder ComfoConnect Splitter 5x 0-10V Manuel D'installation

2. Safety

■ Installation,
commissioning and
maintenance must be
done by a certified
installer, unless specified
differently. Installation
by a non-certified
installer may cause
injury or damage the
correct operation of the
ventilation system.
■ The full installation must
obey the applicable
(safety) regulations as
specified in:
- The local EU Standard
on safety provisions
for low-voltage
installations.
- The manufacturer's
assembly/installation
manual.
■ Make sure there is
no voltage on the
ComfoConnect Splitter
5x 0-10V when you
begin installation or
removal.
■ Make sure the
connection cables are
not damaged.
■ Keep the ComfoConnect
Splitter 5x 0-10V away
from water and humid
environments.
Hazardous electrical
voltage! Risk of death
or injury due to 230V
electrical voltage.
Work on the 230V main
must only be done by
qualified electricians.
Keep children and
animals away from the
installation area.
Only install the
ComfoConnect Splitter
5x 0-10V as described in
this manual.
Always follow local
safety precautions when
installing the system.
13 EN