VOLTCRAFT B5 Notice D'emploi page 48

• Are all connector cables and plugs undamaged, do the plugs stay firmly in
the sockets? Worn-out plugs and damaged cables should be replaced.
• When connecting a battery to the charge, always connect the charging cable
to the charger first, then the battery to the charger/charging cable. When
disconnecting, do so in reverse order to the above. Failure to do so presents
the danger of a short circuit (e.g. from the two 4mm circular connectors on the
charging cable).
• Only ever charge one battery pack at a time.
• If you wish to charge battery packs that you have manufactured yourself, the
cells must be identical in their construction (same type, same capacity, same
manufacturer). The cells must also be charged to the same level (LiPo
batteries can be balanced out using the balancer, this is, however, not
possible with other battery packs such as NiMH or NiCd).
Using the menus:
• Select the desired submenu from the main menu using the "Batt Type/Stop" key as
described and confirm your selection with the key "Start/Enter".
• Using the keys "INC" and "DEC", the various configuration options can be called up.
• To modify a value, press the "Start/Enter" key - the display then flashes.
• Modify the value displayed using the "INC" and "DEC" keys.
• Save the (modified) value with the "Start/Enter" key.
• Exit the configuration menu using the "Batt Type/Stop" key. It then returns to the main menu.
48