Steam-Cleaning Glass Surfaces; Refreshing Upholstery And Clothing - Dirt Devil vaporex M380 Mode D'emploi

4 Operation

4.2 Steam-cleaning glass surfaces

CAUTION: Do not use on cold glass!
A
30 cm
12

4.3 Refreshing upholstery and clothing

13
ATTENTION:
Cold Glass surfaces can shatter as a result of heat shock. Always warm
glass surfaces before directly using steam on them. Do not work on win-
dow panes on cold days!
1. Warm the glass surface to be cleaned by applying steam from a dis-
tance of 25 to 30 cm (10 to 12 inches) (Fig. 12/A).
2. Reduce the distance to 15 to 20 cm (6 to 8 inches) to evenly cover the
glass surface with steam.
B
3. Switch off the steam flow and engage the child safety device on the
steam pistol.
4. Strip the water off of the glass surface with the rubber blade of the
squeegee (Fig. 12/B).
5. Wipe the rubber blade and the bottom edge of the glass surface dry af-
ter each pass of the squeegee.
WARNING:
Danger of scalding! Never apply the steam jet directly to pieces of cloth-
ing while they are still being worn by persons or animals!
ATTENTION:
Before refreshing upholstery or clothes, make sure that their material
and colour is suitable for steam cleaning. Always follow the cleaning rec-
ommendations of the material manufacturers.
NOTE:
We recommend to always use the cotton cover (Fig. 13) when refresh-
ing upholstery or clothing as this reduces the formation of condensation
drops that can adversely affect the cleaning result.
21