Customer Service; Technical Specifications - Junker JG4119260 Notice D'utilisation

Customer service

en
The microwave has stopped for no
apparent reason.
An i is shown on the display.
Error message "E - 3"
--------
4Customer service
O ur after-sales service is there for you if your appliance
C u s t o m e r s e r v i c e
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please quote the full product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. The rating plate
bearing these numbers can be found on the right-hand
side when you open the cooking compartment door.
To save time, you can make a note of the numbers for
your appliance and the telephone number of the after-
sales service in the space below in case you need
them.
E no.
After-sales service O
Please note that a visit from an after-sales service
engineer is not free of charge in the event that the
appliance has been misused, even during the warranty
period.
After-sales contact details for all countries can be found
in the attached after-sales service directory.
This appliance corresponds to the standards EN 55011
and CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the
purpose of heating food. Class B states that the
appliance is suitable for private households.
36
The microwave has a fault.
The appliance is in demo mode
Fault in automatic door opening system.
FD no.
If this fault recurs, please call the after-sales service.
Deactivate demo mode.
~ "Basic settings" on page 34
If an error message is displayed, switch the appliance
off and on again; if the message disappears, it was a
one-off problem. If the fault occurs again or the error
message is still displayed, please contact the after-
sales service and provide the fault code.

Technical specifications

Input voltage
Power consumption
Max. output power
Max. grill output power
Microwave frequency
Circuit breaker/fuse rating
Dimensions (H/W/D)
- Appliance
- Cooking compartment
VDE approved
CE mark
220-230 V AC, 50 Hz
1270 W
800 W (IEC 60705)
1000 W
2450 MHz
10 A
382 x 594 x 317 mm
201 x 308 x 282 mm
Yes
Yes