Starting The Memory; Saving Memory Settings; Programmes; Setting A Programme - Junker JG4119260 Notice D'utilisation

Memory
en
BMemory
T he memory function allows you to save the setting for
M e m o r y
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.

Saving memory settings

Example: 360 W, 25 minutes
Touch the field.
l
1.
The indicator lamp above the field will light up.
Touch the microwave power setting you require.
2.
The indicator lamp above the field will light up and
1:00 min will appear in the display.
Set the cooking time on the settings area.
3.
Touch the field to confirm.
l
4.
The clock will reappear. The setting has been saved.
Notes
You can also save grill only or grill combined with
■
microwave settings.
You cannot save several microwave power settings
■
one after the other.
You cannot save automatic programmes.
■
You can save the memory settings and start the
■
appliance immediately. Do not touch
touch the field instead.
<
To create a new memory setting: Touch the
■
field. The old settings will appear. Save the new
l
programme as described in steps 1 to 4.

Starting the memory

It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
Touch the field.
l
1.
The saved settings will be displayed.
Touch the field.
<
2.
The cooking time will count down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch / . The clock will reappear.
a s
Pausing
Touch the / field once or open the appliance door.
a s
Operation will be paused. The indicator lamp above the
/ field will light up. After closing the door, touch the
a s
field again.
<
32
Cancelling operation
Touch the
the
PProgrammes
Y ou can prepare food really easily using the various
P r o g r a m m e s
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 8 programmes.

Setting a programme

Once you have selected a programme, configure the
settings as follows:
1.
2.
3.
to finish;
l
4.
You will see the cooking time for the programme
counting down.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch
Making amendments
Touch the
/ field twice or open the door and touch
a s
/ field once.
a s
Touch repeatedly until the required programme
%
number appears.
The indicator lamp above the field will light up.
Touch the x field.
The indicator lamp above the field will light up and a
default value for the weight will appear in the display.
Use the settings area to specify the weight of the
dish.
Touch the field.
<
/ . The clock will reappear.
a s
a / s field twice and reconfigure the settings.