Ugin PRESSOJET Mode D'emploi page 15

Instructions for use
GENERAL CARE AND CLEANING :
To ensure long-term performance of this device, it is necessary to clean the
■
water tank using the special additive sent with the PRESSOJET, at least once
every three months (or more often under conditions of intense use).
To do this, you must:
- Disconnect the mains supply.
- Mix 5Cl of the product with 75Cl water.
- Remove filler cap
solution.
- Turn on the device and allow the machine to warm up for about 15
minutes.
- Using the steam gun (nozzle pointing downwards) release a small amount
of steam.
- Disconnect from the mains once more and then leave overnight for the
cleaning product to work.
- Unscrew filler cap
(bottom left hand corner).
- Unscrew the tank outlet plug.
- Rinse the tank with running water for 2 to 3 minutes.
- Replace the outlet plug and then the cover.
- The PRESSOJET is now ready for re-filling.
SPECIAL PRECAUTIONS:
Cleaning additive:
- Never swallow or inhale this product.
- Avoid contact with skin and eyes.
- Never mix with other cleaning products.
- Never leave within reach of children.
1
then fill the (empty) tank with the 80 Cl prepared
1
then remove the cover from the back of the machine
13
PRESSOJET