Instructions for use
UTILISATION :
Once you have filled the tank with 3 litres of distilled (or demineralised) water
■
1
and closed cap
securely, activate switch
device.
The heat indicator
■
operating pressure is reached (the needle of the pressure indicator
the blue area).
WARNING: Never try to unscrew filler cap
has pressurized (4.5 Bar).
7
Press button
on the steam gun
■
To obtain steam from the fixed nozzle
■
When there is no more water in the PRESSOJET tank, the red indicator
■
(water level) will come on and an audible signal confirms that the tank is dry.
The device's heater then switches off automatically.
It is then necessary to re-fill the machine, following these instructions very
■
carefully:
- Wait for the pressure indicator
- Carefully unscrew filler cap
- Wait a few minutes longer before starting to re-fill. If water is added too
quickly, it could turn to steam in contact with the hot element.
3
(green) will come on and will not go out until normal
5
to release steam.
4
1
.
9
, located on the left hand side of the
1
once the equipment
11
10
, press button
to return to 0.
12
PRESSOJET
4
moves into
.
2