Motor Housing - Winkhaus blueMatic EAV Instructions D'installation, D'utilisation Et D'entretien

EN
Installation, Operating and Maintenance
Instructions blueMatic EAV
2
1
2
3
4
5
6
NOTICE!
7
Please observe the following instructions when using a swing door opener:
• Ensure that the motor can open the closing leaf at any time.
• After unlocking, the control unit sends a signal to the swing door opener which
8
must them open out immediately.
• If the automatic door drive is triggered at another point of time, malfunctions can
be caused.
• If the main hook is unlocked manually, the door may not be actuated electrically.
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen
Subject to technical changes

Motor housing

Motor housing for powered unlocking, including control, but wi-
thout cable
• for transponder or wireless remote control
• switching unit for swing door opener via floating contact
• available separate (for retrofitting mechanical locks autoLock
AV3 and autoLock AV2)
Motor housings are suitable for motor extension of the autoLock
AV3 (also for autoLock AV2) up to blueMatic EAV3 (blueMatic
EAV2).
STV-MOTOR HOUSING EAV3 BL
STV-MOTOR HOUSING EAV3 DREHTÜR BL
to retrofit simply screw to the autoLock AV... (automatic lo-
1)
cking system)
CAUTION!
incl. signal (floating contact) for swing door opener
2)
18
1)
Pay attention to left-handed thread!
Print-no. 504 474 4
01/2017
5009320
5009324
1) 2)
www.winkhaus.de