Mounting Ceiling Fixture; Suspending The Luminaire; Connecting The Luminaire - Waldmann Lavigo Mode D'emploi

ENG
3.4

Mounting ceiling fixture

Fig. 3: Mounting ceiling fixture.
X Screw a ceiling fixture B at the connec-
tion side of the luminaire with the strain
relief A and a suitable screw to the ceil-
ing, see Fig. 3.
X Screw the second ceiling fixture with
the distance a and a suitable screw to
the ceiling, see Tab. 3.
3.5

Suspending the luminaire

Fig. 4: Suspending the luminaire.
X Screw one wire rope holder B respec-
tively into each ceiling fixture A, see
Fig. 4.
X Lead the wire ropes through the guide
bushings C.
X Press the guide bushing up using a
pointed object and adjust the wire ropes
to the required length.
34
X To fix the wire ropes, loosen the guide
bushings.
3.6

Connecting the luminaire

A
WARNING
Risk of electrocution due to live com-
B
ponents!
In case of incorrect connection, the
housing of the luminaire or the wire
ropes may carry electric voltage and
cause severe injuries.
X Have the light connected by a skilled
electrician only.
X The light must be connected to a
mains supply with protective earth
conductor.
X Connect the wire rope to the protec-
tive earth conductor terminal.
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Compare the mains voltage with
A
the nominal voltage and the fre-
quency specified on the rating
B
plate and make sure that they are
C
identical.
Installation