Dimplex GFP 050 B Instructions De Montage Et De Service page 10

GB
Installation and Operating Instructions
RX PW 1 7-Day Programming Cassette
1. Description
The programming cassette allows you to program for the
weekdays Monday to Friday as well as for the weekend, i.e.
Saturday to Sunday, up to 4 different time block in each
case, during which the heater is switched on. The pro-
gramming cassette can be used individually, i.e. for one
heater, or serially, i.e. for a group of heaters (e.g. for a
complete dwelling unit).
In the case of serial use, one heater is fitted with the pro-
gramming cassette. This unit is the so-called "master con-
trol". After the electrical wiring (as shown in the installation
instructions of the heater) has been completed, all time
functions set on the master device will be transmitted to
each slave heater connected in series. The heating pro-
gram preset on the master device (time blocks for On/Off)
will also be executed on all slave heaters.
2. Installation
Turn off heater and carefully tilt it toward the front. With a
flat-blade screwdriver push latching clip of cover in the di-
rection of the arrow and remove cover. Slide cassette all the
way into the opening.
3. Setting the Time and Day
Press the PROG button.
The "clock" symbol appears
in the upper left corner of
the display and the hours
flash. Set the hours using
the ▼▲ buttons, confirm
with ENTER. Use the same
procedure to set the min-
utes. Confirm with ENTER.
The weekday indicator ►
flashes. Select the individual weekdays using the ▼▲ but-
tons and confirm with ENTER.
M Monday T Tuesday
F Friday S Saturday
4. Manual Switching On/Off Mode
Switch on the heater (indicator lamp is illuminated).
Press the MODE button
until MAN ON appears on
the display. The device is
switched on. If you wish to
switch the device off, press
MODE once more. The dis-
play MAN OFF appears.
The device is switched off.
M
T
W
00 :00
T
F
S
OFF
MAN
S
MODE PROG ENTER
W Wednesday T Thursday
S Sunday
14
:00
MAN ON OFF
MODE PROG ENTER
5. Automatic Mode
Switch on the heater. First, the weekdays Monday to Friday
are set. Press the PROG button twice. P1 ON appears on
the display and the hours flash. Set the hours using the
▼▲ buttons, confirm with ENTER. Use the same procedure
to set the minutes. Confirm with ENTER.
Note: Minutes can be set in 10-minute increments only!
P1 OFF now appears on the dis-
play. Set the desired switch-off
time and confirm with ENTER.
Program P1 has thus been set. P2
now appears, i.e. another heater
operating time can be pro-
grammed. Programs P3 and P4
can be set in the same manner.
After the P4 OFF display has been confirmed, the program
switches to the setting mode for the two weekend days Sat-
urday and Sunday. The procedure for setting these time
blocks is the same as for the weekdays. The arrow on the
right of the display marks the currently selected day.
To prematurely abort the setting procedure, press the
PROG button. All values already set will be retained.
For the preset programs to be executed, the programming
cassette must be in the AUTO (automatic) mode. The oper-
ating mode can be selected by means of the MODE button.
6. Key Lock Setting
Successively press ENTER and
MODE. The buttons must be
pressed within 1 second. The key
symbol appears on the display. All
key functions are locked.
When the key combination is
pressed once more, the keys are
unlocked.
7. ADVANCE Mode
The ADVANCE mode enables the
heater to provide instant heat, i.e.
before the preset starting time.
Example: It is 2 p.m. A heater op-
erating time from 5 p.m. – 7 p.m.
has been programmed, but you
want to start the heater operation
immediately. The programmer is in
the AUTO mode. Press the ▲ but-
ton for 3 seconds. ADVANCE appears on the display. The
heater is now switched on and operates until the end of the
programmed time period (i.e. until 7 p.m.). When the origi-
nally programmed starting time of the heater
(5 p.m.) is reached, ADVANCE will disappear from the dis-
play.
The ADVANCE function can be manually cleared at any
time. Simply press the ▼ button.
10
M
T
ON
W
00 :00
T
P1
F
S
AUTO
S
MODE PROG ENTER
M
T
W
14:00
T
F
S
S
MODE PROG ENTER
M
T
ON
W
14 :00
T
ADVANCE
F
S
AUTO
S
MODE PROG ENTER