Make a long press (>3 seconds) on the lamp key - : child safety lock is activated
and the -
symbol is displayed. A long press (>3 seconds) again on the same key
and the control panel will be unlocked.
Note : You can activate and deactivate child safety lock when the oven is on or off
mode by a long press (>3 seconds) on - key.
4. CLEANING &
MAINTENANCE
4.1 Auto scale removing function
For best cleaning results, we recommend that you use detergent sodium citrate,
which were randomly for descaling steam oven. Follow the manufacturer's
instructions on the packaging. It is
suggested that descaling function should be used after the steam function has
been run for 20 hours.
Remove the water tank by pressing the water key - , inject 1000ml of fresh water
into the water tank, adding a pack of descaling agent. Push the water tank into the
appropriate location of the appliance. Press the auto program key - until the
screen display A15 which means the oven enters auto scale removal function. The
time setting by default is 40:00 min, tank icon shows the current water level, press
-
key to launch the program. When the remained time counts down to 10:00, the
program is paused and reminds lack of water.
Take out the water tank, empty the content of the tank and refill it with clean water
and replace it. Launch again A15 program.
Note: the descaling process shall not be shut down. If the descaling program is
stopped during process it should be started again from the initial step.
4.2 Clean up function
Press the auto program key -
until the screen display A16 which means the oven
enters clear up function. The time setting is by default 05:00 min, tank icon shows
the current water level (water, lack of water, full of water), press
- key to launch
the program. Some steam will be generated in the cavity and the fan will work out.
Once the process is completed you can clean the cavity with a soft cloth.