Operation; Preparation - Bosch MUM5 Série Mode D'emploi

Selecting the operating position:
■ Press the Release button and move the
swivel arm. Support movement with your
hand.
■ Move the swivel arm until it engages in the
required position.
Position Drive
1 7
2 7
3 6
9
4
7
* Insert / remove whisk, stirrer or kneading
hook. Add large quantities of ingredients.
MUM52.. MUM
54/55/
56..
1­4 1­7
1­4 1­7
1­2 1­3
* – –
2­4 3­7
2­3 3­5
3­4 5­7
3­4 5­7

Operation

W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
Attention!
Do not operate the appliance without an
accessory/tool in the operating position. Do
not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave­safe.
■ Before operating the appliance and acces­
sories for the first time, clean thoroughly;
see "Cleaning and servicing".
Important information
In these instructions for use the recom­
mended reference values for the operating
speed refer to appliances with a 7­setting
rotary switch. For appliances with a 4­setting
rotary switch you can find the values in
brackets after the values for a 7­setting
rotary switch.
These operating instructions contain a
sticker with reference values for the oper­
ating speed of the appliance when using
the tools or accessories. We recommend
attaching this sticker to the appliance
(Fig. C).

Preparation

■ Place the base unit on a smooth, clean
surface.
■ Pull out the power cord (Fig. D).
MUM52../MUM54..
Cord store:
Pull out cable to the required
length.
MUM55../MUM56..
Automatic cord winder:
Pull out the cord in one go to
the required length (max.
100 cm) and slowly release; the
cord is locked.
Reducing the cord length:
Pull gently on the cord and allow it to roll
up to the required length. Then gently pull
the cord again and slowly release; the
cable is locked.
Operation en
21