Risk Of Electrical Shock; Installation Of The Unit - AVG AVL-306CBS Instructions D'installation Et Guide De L'usager

2. INSTALLATION INSTRUCTIONS (continued)
WARNING:

RISK OF ELECTRICAL SHOCK

This range hood must be properly grounded. Make sure it is installed by a qualified electrician in accordance
with all applicable national and local electrical codes. Before connecting wires, switch power off at the
service panel and lock service panel to prevent power from being switched on accidentally.

INSTALLATION OF THE UNIT

 Drill 2 holes of 0,8mm on a sturdy wall and inline with the hood.
 Insert expended screws into the hole.
 Fix drilling template on the wall
 Attach the duct to the one-way valve, and connect it to the kitchen outlet vent.
 Insert the outer funnel (alternative part) make sure it is firmly secured.

Mount the bracket and insert the inner funnel. Use screws to fix it.
Note: This image is for reference only. Your unit may differ from the one shown in this diagram.
24