Futurelight MH-420 Spotlight Mode D'emploi page 45

Choose the device which is to control the effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a balanced microphone lead.
Connect the DMX OUT-jack with the DMX IN-plug of the next device.
Caution: At the master-device and at the last slave-device, the DMX-cable has to be terminated with a
Ω
terminator. Solder a 120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output.
45