Cleaning The Nozzle - Gaggenau CM 210 Notice D'utilisation Et D'entretien

Cleaning the nozzle

Clean the nozzle after each use.
̨
Place a suitable receptacle under the nozzle.
̨
Briefly set function selector to 0 .
m
Avoid the risk of scalding!
When the function selector is set to 0 , the nozzle may
spurt slightly. Escaping water is very hot.
Do not touch nozzle or direct at people!
̨
Set function selector to )
̨
Wipe the outside of the nozzle after it has cooled
down.
̨
Dismantle the nozzle to clean thoroughly.
Proceed as follows:
̨
Unscrew the nozzle with a coin.
̨
In particular, clean the tip of the nozzle with a brush
and pointed implement.
̨
Clean all parts with hot water and detergent, rinse
and dry (dishwasher-safe).
CAUTION
WARNING
position.
m
29