Gaggenau CM 210 Notice D'utilisation Et D'entretien page 13

Display
Display indicates the settings, the processes which are
running and any messages issued by the appliance.
The appliance has been programmed with standard
settings for optimum operation. These settings can be
changed – see chapter "Changing settings /
programming".
ON/OFF Button V
The appliance is switched on or set to standby mode with
button V .
When button V is pressed, the appliance heats up and
is then rinsed. The illuminated ring on button V flashes
during this process.
The appliance is not rinsed if:
– the appliance was still warm when switched on or
– coffee was not discharged before the appliance was
switched to "standby" mode.
Heating and washing processes are displayed.
While coffee is being brewed, button V is assigned
a stop function. The process is terminated by pressing
button V .
4 hours after the last coffee was brewed,
a rinsing process is automatically initiated and
the appliance switches to "standby" mode.
These settings can be changed – see chapter
"Changing settings / programming".
Cafe button
Espresso or coffee can be brewed by pressing the
n buton. The green illuminated ring flashes while
espresso or coffee is being brewed.
If the n button is pressed again, the coffee brewing
process is terminated.
13