Preparing hot water
Steam for heating drinks
̨
Push down the sleeve a on nozzle.
̨
Place an appropriate cup under the nozzle.
̨
Rotate function selector to 0
m
Avoid the risk of scalding!
When the function selector is set to 0 , the nozzle may
spurt slightly. Escaping water is very hot.
Do not touch nozzle 12 or direct at people!
̨
End the process by rotating the function selector
back to )
position.
̨
Push up the sleeve a on nozzle.
̨
Immerse nozzle deep into the liquid which is to be
heated.
̨
Slowly rotate function selector to = .
The appliance now heats up for approx.
20 seconds. Then the liquid is heated.
m
Avoid the risk of scalding!
When the function selector is set to = , the nozzle
may spurt slightly. Escaping steam is very hot.
Do not touch nozzle 12 or direct at people!
̨
End the process by rotating the function selector
back to )
position.
Note: When nozzle has cooled down, clean immediately.
Dried residue is difficult to remove.
and fill the cup.
WARNING
WARNING
m
m
17