Changing Settings / Programming; Programming - Gaggenau CM 210 Notice D'utilisation Et D'entretien

Changing settings / programming

Programming

The appliance has been set so that coffee can be brewed
without any additional programming.
These basic settings can be changed with the function
buttons under the display.
r Selection button
q Access to programming mode /
Save settings
o Terminate programming
s Selection button
Do not switch off the appliance during programming.
Otherwise changes will not be saved.
The appliance must be switched on before the standard
settings can be changed.
The following settings can be changed:
– Language
– Water hardness
– Filter
– Temperature
– Current time
– Timer function
– Energy saving mode
Factory settings have a grey background in this chapter –
see example opposite.
CAUTION
19