Getting Started; Important - Corsair HS70 Guide De Démarrage Rapide

GETTING STARTED

7
Connect the wireless USB transmitter to any working USB port
on your PC.
The CORSAIR HS70 WIRELESS headset is designed to operate at
a range of up to 40 feet (12m) from the wireless USB transmitter,
but other wireless devices, electronics, and obstructions such as walls
may reduce wireless range.

Important:

The first time you use the CORSAIR HS70 WIRELESS headset
transmitter on a PC, the operating system will automatically install the
device driver. After the device driver loads, we recommend you reboot
your PC before use.
CHARGING 1
Important:
The CORSAIR HS70 WIRELESS headset must be fully charged before
its first use.
• Connect the USB charging cable to any working USB port on your PC.
• Connect the USB charging cable to the
CORSAIR HS70 WIRELESS headset.
The CORSAIR HS70 WIRELESS headset battery has no
"memory effect", so there is no need to completely discharge it before
recharging. The lithium-ion battery in the CORSAIR HS70 WIRELESS
headset will last for hundreds of charge/discharge cycles.
Remember that the USB charging cable requires a high power (USB 2.0
or better) port. Some USB ports found on older devices do not
support USB 2.0.
Charging while power is off:
When the headset is OFF, and CHARGING with a connected USB cable,
the Status LED reports the charge and battery status:
Status LED Displays
AMBER (SOLID): Charging
GREEN (SOLID): Fully Charged
8