Personnel Qualification; Skilled Personnel; Operating Personnel; Personal Protective Equipment - WIKA IV10 Mode D'emploi

3. Safety

3.5 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and
damage to equipment.
▶
The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualifications described below.

Skilled personnel

Skilled personnel, authorised by the operator, are understood to be
personnel who, based on their technical training, knowledge of measu-
rement and control technology and on their experience and knowledge
of country-specific regulations, current standards and directives, are
capable of carrying out the work described and independently recognis-
ing potential hazards.

Operating personnel

The personnel trained by the operator are understood to be personnel
who, based on their education, knowledge and experience, are capab-
le of carrying out the work described and independently recognising
potential hazards.
Special operating conditions require further appropriate knowledge, e.g.
of aggressive media.

3.6 Personal protective equipment

The personal protective equipment is designed to protect the skilled
personnel from hazards that could impair their safety or health during
work. When carrying out the various tasks on and with the product, the
skilled personnel must wear personal protective equipment.
Follow the instructions displayed in the work area regarding
personal protective equipment!
The requisite personal protective equipment must be provided by the
operating company.
WIKA operating instructions, shut-off valves and valve manifolds
EN
9