Intended Use; Personnel Qualification; Skilled Personnel; Special Hazards - WIKA PGS23.100 Mode D'emploi

2. Safety

2.1 Intended use

These pressure gauges are used for measuring pressure and for the
switching of switching currents in industrial applications.
GB
The pressure gauge has been designed and built solely for the intended
use described here and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

2.2 Personnel qualification

Skilled personnel

Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work
described and of independently recognising potential hazards.

2.3 Special hazards

6
WIKA operating instructions pressure gauge model PGS with reed contacts
WARNING!
Risk of injury if qualification is insufficient!
Improper handling can result in considerable injury and
damage to equipment.
The activities described in these operating instructions
■
may only be carried out by skilled personnel who have
the qualifications described below.
WARNING!
When installing, commissioning and operating these instru-
ments, observe the appropriate national safety regulations
(e.g. VDE 0100).