Personnel Qualification - WIKA A2G-05 Mode D'emploi

3. Safety

3.4 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to
property.
▶
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel
who, based on their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
3.5 Labelling, safety marks
Product label (example)
Model

Measuring range

Output signal

Before mounting and commissioning the instrument, ensure you read the
operating instructions!
WIKA operating instructions, model A2G-05
Type:
A2G-50
Range: -250 ... +250 Pa
Output: 0 ... 10 V / 4 ... 20 mA
Supply: DC 24 V / AC 24 V ±10 % < 1 W
E-Nr. 66209848
Made in EU
Supply voltage

Serial number






EN
7