TFA 35.1093 Instructions D'utilisation page 6

TFA_No_35.1093_Anleitung_11_14
LUMAX
– Wireless weather station
Thank you for choosing this instrument from TFA.
1. Before you start using it
• Please make sure to read the instruction manual carefully. This information will
help you to familiarise yourself with your new device, to learn all of its functions
and parts, to find out important details about its first use and how to operate it,
and to get advice in the event of faults.
• Following and respecting the instructions in your manual will prevent damage to
your instrument and loss of your statutory rights arising from defects due to
incorrect use.
• We shall not be liable for any damage occurring as a result of non following of
these instructions. Likewise, we take no responsibility for any incorrect readings
and for any consequences which may result from them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
2. Scope of delivery
• Weather station
• Batteries 2 x 1,5 V AAA and 2 x 1,5 V AA
• Outdoor transmitter (30.3167)
3. Field of operation and all of the benefits of your new instrument at a
glance
• Outdoor temperature wireless (433 MHz), distance range up to 30 m (free field)
• Indoor temperature
• Maximum and minimum values
• Weather forecast with symbols and tendency of atmospheric pressure
• Radio-controlled clock with alarm and snooze function
• Permanent LED backlight
• For wall mounting or table standing
4. For your safety
• This product is exclusively intended for the field of application described above.
The product should only be used as described within these instructions.
• Unauthorised repairs, modifications or changes to the product are prohibited.
Caution!
Risk of electrocution!
• Plug the basic unit only into a socket installed in regulation manner and with a
mains voltage of 230V!
• The basic unit and the mains adapter must not come into contact with water or
moisture. Only suitable for operation in dry interiors.
• Do not use the unit if the housing or the mains adapter are damaged.
• Keep the unit out of reach of persons (including children) who cannot fully
appreciate the potential risks of handling electrical equipment.
• Pull the plug out of the socket immediately if any fault occurs or if the unit is not
used for a lengthy period.
• Only use the supplied mains adapter.
• First connect the lead to the basic unit and then insert the mains plug into the
socket.
• Do not pull the plug out of the socket by its lead.
• Route the mains lead so that it does not come into contact with sharp-edged or
hot objects.
10
10.12.2014 18:18 Uhr Seite 6
• Power adapter
• Stand (optional)
• Manual
LUMAX
– Wireless weather station
Caution!
Risk of injury:
• Keep these instruments and the batteries out of the reach of children.
• Batteries must not be thrown into a fire, short-circuited, taken apart or
recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as pos-
sible to prevent damage caused by leaking. Never use a combination of old and
new batteries together, nor batteries of different types. Wear chemical-resistant
protective gloves and safety glasses when handling leaking batteries.
Important information on product safety!
• Do not place your product near extreme temperatures, vibrations or shocks.
• The outdoor transmitter is protected against splash water, but is not watertight.
Choose a shady and dry position for the transmitter.
• Protect it from moisture.
5. Elements and buttons
5.1 Receiver (Display unit) Fig. 1
LCD
A. IR motion sensor
B. Weather tendency indicator
C. Weather forecast icon
D. Battery symbol for weather station
E. Radio controlled time
F. Alarm symbol
G. Radio controlled time icon
H. Indoor temperature display
I. MAX function for indoor temperature
J. Battery symbol for outdoor sensor
K. Channel number of outdoor transmitter
L. MAX function for outdoor temperature
M. Outdoor temperature
Buttons
1. " " button
2. "MAX/MIN" button
3. "MENU/SETUP" button
4. "CH" button
5. "▲" button
6. "▼" button
7. "RESET" button
Use a pin to press the "RESET" button and restore all settings to factory default.
8. "BRIGHT/DIM" button
Press the button and you can select a bright LED display or a dim one.
Housing
N. Wall mount hole
O. Sensor cable with jack
P. Stand (optional)
Q. Battery compartment
11