Do You Want To Query The Plant's Operating State In A Room Group - Siemens Synco 700 Manuel D'utilisation

Do you want to query the plant's operating state in a room group?

If, during automatic heating / cooling operation, you want
to know your plant's current operating state (the room
operating mode), go to the Info level:
1. Go back to the start display by pressing the ESC
button.
2. Press the INFO button or turn the OK knob.
The room operating state is displayed as follows:
Room group 1
Operating mode:
Cooling setpoint:
Heating setpoint:
Time switch
Cause:
Meaning:
Operating mode:
Here, the currently active room operating mode is dis-
played. In this example, it is room operating mode
Comf for room group 1.
12
Siemens Building Technologies / HVAC Products
1
Comf
24.0 °C
21.0 °C
Cooling setpoint:
Here, the Comfort setpoint of cooling is displayed.
Heating setpoint:
Here, the Comfort setpoint of heating is displayed.
Cause
Here, the cause for the current operating state is given.
Possible reasons:
• Operating mode switch (manual changeover)
• Operating mode selector (manual changeover)
• Occupancy button on the room unit
• Timer button on the room unit
• Special day
• Holidays
• Time switch of the time program (in the example
shown)
CE1B3121x2-en 74 319 0462 0 a 15.04.2005