Stirring; Principle; Screen - Alliance Bio Expertise MEDIAWEL 10 Manuel D'utilisation

Stirring



Principle


The stirrer's speed can be set between 4 rpm and 64 rpm by selecting a figure between 1 and 9 in the stirring
speed parameters.
The following table displays the corresponding values in rpm:
Speed parameter
Corresponding speed in
rpm
The speed setting can be set in stand-by mode and must be configured in each program for all stages of the
cycle (see § stirrer in stand-by mode and § program creation) .

Screen


Active keys:
Switches back to the first screen in the program choice sequence without stopping the
PROGRAMS
stirrer
Switches to the "Parameters" screen
PARAMETERS
Increase / decrease the stirrer's speed (0 = STOP; 9 = max.) - Immediate application
Arrows
Go back to the program selection screen without stopping the stirrer.
Enter
Switches back to the first screen in the program choice sequence without stopping the
Escape
stirrer
The stirrer speed can be set up from 0 to 9.
1 2 3
4 rpm 15 25
rpm rpm
4 5 6
40 50 54
rpm rpm rpm
82
7 8 9
58 62 64
rpm rpm Rpm