Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cycle
Use
Users must have familiarized themselves with the previous paragraphs, relating to the environment and safety,
before proceeding.
Follow the security procedures :
-
Never attempt to force the lid opening.
-
Always ensure that the pressure shown by the vessel pressure gauge is 0 before attempting to
open the lid.
-
Always manually operate the vessel's safety valve before attempting to open the lid, or the
adding or decanting port.
-
Should you need to move the device between 2 workstations, it is important to move it slowly
and to always hold it in both hands during the move.
-
Always put on protective gloves designed for high temperatures before accessing the vessel
→ certain surfaces can actually still be very hot even though the temperature of the medium
is below 80°C.
-
Never attempt to force the drain access hatch open.
Cycle screen
•
STAND-BY cycle
This screen appears when the device is started in stand-by mode. The last program used is suggested when
the device is switched on. Its no., name and a summary of the program's parameters are displayed.
The temperature of the vessel probe is displayed in real time in the left-hand column.
72
Publicité
Table des Matières
Dépannage
