Create - Alliance Bio Expertise MEDIAWEL 10 Manuel D'utilisation

Create


•
Principle
The automated preparator enables a "preparation cycle" to be automatically performed for a volume of culture
medium.A preparation cycle comprises n "steps"; n = 2, 3 or 4
Each step is defined by a temperature setpoint (in °C) and a duration (in minutes)
The temperature setpoint for a step is equal to or greater than 25.0°C and equal to or lower than 123.0°C. It
is defined to the nearest 0.1°C
The duration of a step is equal to or greater than 1 minute and equal to or less than 999 minutes. It is defined
to the nearest 1 minute.
The duration of the last step is always infinite (the cycle is stopped by the user).
The start of the cycle is triggered either by the user (manual start), or by means of a timer (scheduled start).
The phases between the steps are transition phases, which may be "heating" or "cooling"
Each program contains the following information:
Field title
Program number
Program name
Number of steps n
Name of step no. 1
Temperature setpoint for step no. 1
Duration of step no. 1
Alarm at the beginning of step no. 1
Alarm message for step no. 1
Stirring speed in transition to step no. 1
Stirring speed during step no. 1
Name of step no. 2
Temperature setpoint for step no. 2
Duration of step no. 2
Alarm at the beginning of step no. 2
Alarm message for step no. 2
Stirring speed in transition to step no. 2
Stirring speed during step no. 2
Number
01 to 50
40 characters
2, 3 or 4
40 characters
25.0 to 123.0°C
1 to 999
yes/no
40 characters (if an alarm is
enabled)
1 to 9
1 to 9
40 characters
25.0 to 123.0°C
1 to 999 or infinite if n=2
yes/no
40 characters (if an alarm is
enabled)
1 to 9
1 to 9
64