Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Distribution
Operations
order
1
The end of the cycle is indicated by the lights changing from blue to
green
This means that the dispensing temperature has been reached and at
its step → dispensing can be undertaken
2
Open the safety cover
3
Pull the ring on the safety valve in order to ensure that any possible
pressure is released
4
Prepare the decanting tubing and place it on top of the lid but leave it
in its protective packaging before removing the decanting cap
5
Heat the adding port with a blow torch before inserting the tip of the
decanting tubing
Do not heat the decanting tip to not damage the seal
6
Connect the hose to the pump and run dispensing immediately
Operations
80
Symbols
Publicité
Table des Matières
Dépannage
