Search Method; Volume Control - One for All SimpleSet URC-7140 Mode D'emploi

The Search Method allows you to find the code for your device by scanning through all the
codes contained in the memory of the ONE FOR ALL. The Search Method may also work if
your brand is not listed at all.
Example: To search for your TV code: Switch on television (not on standby) and aim
your ONE FOR ALL at your TV.
Select the corresponding device e.g.
Press 9 9 1. The blue LED will blink twice (showed by going out twice).
Next, press POWER.
You may have to press
these keys many times
(up to 150 times) so
please be patient.
6. As soon as your television turns off, press the magic key to store the code.
Congratulations! You should now be able to switch your device back ON and
control your device successfully.
In this example we will set Volume Control (VOL+, VOL- and Mute) to "TV
volume":
Press . The blue LED will blink twice.
Select the corresponding device e.g.
Switch off.
Now you have set the Volume Control to "TV volume". The VOL+, VOL- and
Mute keys will always control "TV volume" independent which device mode
key (TV, SAT, DVD or AMP) is selected.
WWW ONEFORALL COM

Search Method

Volume Control

This feature gives you the possibility to
set the Volume (VOL+, VOL- and Mute)
to always control a certain device (e.g.
TV) independent of which device mode
(TV, S T, DVD or MP) is selected.
e.g.: Control your TV Volume in SAT
mode.
OFF
and then
9