Hilti DX 351 BT Mode D'emploi page 10

Prevention of misuse:
– When the piston tip is worn or damaged, never try to grind the tip in order to re-use the piston. This may cause
serious damage to the tool and will adversely affect fastening quality.
– Please refer to the table below for the right fastener guide/piston/fastener combination. Use of the wrong
combination may result in damage to the tool.
Zuitable fastener guide / piston / fastener / combinations
Fastener guide
X-351-BT FG W1024
X-351-BT FG M1024
X-351-BT FG G
Accessories
Ordering designation
X-351-BT CP coating protector
X-BT PRG 8/15 power regulation
guide
X-BT PRG 10/24 power regulation
guide
TX-BT 4/7-80 stepped drill bit
TX-BT 4/7-110 stepped drill bit
TX-BT 4/7-150 stepped drill bit
XBT4000-A drill
X-BT CD 18/24 centering device
Printed: 20.08.2013 | Doc-Nr: PUB / 5069825 / 000 / 02
Piston type
X-351-BT P 1024
X-351-BT P 1024
X-351-BT P G
Item no. Application
331343/9 Attachment for the fastener guide designed
to prevent damage to painted surfaces.
377088/0 For checking that fasteners (studs) are driven
to the correct depth for X-BT M8 studs.
377089/8 For checking that fasteners (studs) are driven
to the correct depth for X-BT M10, X-BT W10
threaded studs.
377079/9 For drilling holes for the X-BT M10, X-BT W10
or X-BT M8 threaded studs. Ideal for use in
narrow openings where access is restricted.
377080/7 For drilling holes for the X-BT M10,
X-BT W10 or X-BT M8 threaded studs.
Ideal for grating fastenings.
377081/5 For drilling holes for the X-BT M10,
X-BT W10 or X-BT M8 threaded studs.
Ideal for grating fastenings where the parts
to be fastened are of greater height.
For drilling holes with the TX-BT4/7-...
stepped drill bits
378885/8 Positioning aid for drilling holes,
particularly where access is restricted.
Fastener
X-BT W10-24-6 SN12-R
X-BT W10-24-6-R
X-BT M10-24-6 SN12-R
X-BT M10-24-6-R
X-BT M8-15-6 SN12-R
X-BT M8-15-6-R
en
Qty.
10
1
1
10
10
10
1
5