We recommend that you switch off your device or switch it to flight mode in these locations to
avoid interference.
If you use an electronic implant (pacemakers, insulin pumps, neurostimulators, etc), please keep a
distance of 15cm between the device and your electronic implant.
Do not expose the device to direct sunlight or other source of extreme heat or cold. Operating
temperature: -10°C and 40°C.
Risk of fire or electric shock
Do not expose this device to rain or moisture. Do not expose the product to water droplets
or to splashes and do not place any object filled with liquid, such as a vase, on the device.
Do not use the product near flammable or explosive materials.
Device to handle with care
Do not exert excessive pressure on the screen and do not put objects on it. This could damage the
screen. Do not drop the device. Do not expose the device to shocks, friction or impact.
Operating guidelines
Maintaining the device
Keep the device away from all metal objects (coins, keys, etc). Clean only with a soft cloth (dry
or slightly damp).
Do not attempt to disassemble the device; it would no longer be covered by the warranty. Use
only the spare parts/accessories specified by the manufacturer. Refer to a qualified person for
any repairs. After any service or repair carried out on this product, ask the technician to perform
a safety check.
Prevent data loss
Significant electromagnetic interference or electrostatic discharge may cause malfunction or loss
of data. If the device is not working properly, restart the device or unplug the mains adaptor from
the power outlet then plug it in again. In order to prevent data loss, remember to make a (computer
or paper) back-up of information saved on the device.
Recycling
The symbol shown here and on the product means that the product is classed as
Electrical or Electronic Equipment and should not be disposed with other household
or commercial waste at the end of its working life.
The Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has
been put in place to recycle products using best available recovery and recycling
techniques to minimise the impact on the environment, treat any hazardous
substances and avoid the increasing landfill.
46