Weller WXPP Traduction De La Notice Originale page 12

EN
ENGLISH
Faults and defects must be repaired immediately.
ψОПorО usТnР tСО unТt ή tooХ, sКПОtв НОvТМОs must ЛО МКrОПuХХв
МСОМФОН to mКФО surО tСКt tСОв КrО ПunМtТonТnР propОrХв КnН
Тn tСО mКnnОr ТntОnНОНέ ωСОМФ tСКt movТnР pКrts КrО ПunМ-
tТonТnР propОrХв КnН КrО not stТМФТnР, КnН аСОtСОr pКrts КrО
НКmКРОНέ χХХ pКrts must ЛО МorrОМtХв ittОН КnН must sКtТsПв
КХХ tСО rОquТrОmОnts nОМОssКrв to РuКrКntОО trouЛХОПrОО
operation of the unit.
Use the correct tool. UsО onХв КММОssorТОs or КuбТХТКrв НО-
vices which are included in the list of accessories or appro-
vОН Пor usО Лв tСО mКnuПКМturОrέ UsО АϋδδϋR КММОssorТОs
or КuбТХТКrв НОvТМОs on orТРТnКХ АϋδδϋR ОquТpmОnt onХвέ TСО
usО oП otСОr tooХs КnН otСОr КММОssorТОs МКn МКusО ТnУurвέ
Secure the tool. UsО МХКmpТnР iбturОs to СoХН tСО
workpiece.
Use a solder fume extraction unit. If appliances for
МonnОМtТnР soХНОr ПumО ОбtrКМtТon unТts КrО КvКТХКЛХО, ОnsurО
tСКt tСОв КrО МonnОМtОН КnН usОН propОrХвέ
SpОМТiОНΝωonНТtТonsΝτПΝUsО
UsО tСО soХНОrТnР Тron ОбМХusТvОХв Пor tСО purposО ТnНТМКtОН
in the Operating Instructions of soldering and desoldering
unНОr tСО МonНТtТons spОМТiОН СОrОέ
TСО soХНОrТnР Тron mКв onХв usОН Тn МomЛТnКtТon аТtС АОХХОr
SuppХв UnТtsέ
TСТs НОvТМО mКв onХв ЛО usОН Кt room tОmpОrКturО КnН
indoors. Protect against moisture and direct sunlight.
User groups
Due to differing degrees of risk and potential hazards, sever-
КХ аorФ stОps mКв onХв ЛО pОrПormОН Лв trКТnОН ОбpОrtsέ
Work step
Default soldering para-
meters
RОpХКМТnР ОХОМtrТМКХ rОpХК-
cement parts
Default maintenance
intervals
Operation
Filter change
Operation
Filter change
RОpХКМТnР ОХОМtrТМКХ rОpХК-
cement parts
Care and maintenance
WARNING
Before doing any work on the machine, pull the
plug out of the socket. Leave the unit to cool down.
www.valuetronics.com
12
User groups
Specialist personnel with
technical training
Electricians
SКПОtв ОбpОrt
Non-specialists
Technical trainees under the
guidance and supervision of
К trКТnОН ОбpОrt
ωСОМФ КХХ МonnОМtОН МКЛХОs КnН СosОs on К rОРuХКr ЛКsТsέ IП
poаОr tooХs КrО НКmКРОН, tСОв must ЛО ТmmОНТКtОХв
removed from use.
Do not use blocked nozzles.
Repairs must always be referred to a
Weller-trained specialist.
UsО orТРТnКХ rОpХКМОmОnt pКrts onХвέ
Risk of burns
WARNING
τnХв rОpХКМО tСО soХНОrТnР tТps аСОn tСОв КrО МoХНέ
•
TСО soХНОrТnР tooХ must ЛО ХОПt sаТtМСОН oПП Тn tСО sКПОtв rОst
for at least 3 minutes until the soldering tip has cooled down.
The LED status indicator must be at „OFF".
Temperature performance
The soldering tool has an internal usage sensor which can
ЛО usОН to sОt Кn КutomКtТМ sаТtМСάoПП ПunМtТon (StКnНάЛв)έ
The settings can be found in the station's operating instruc-
tions.
Warranty
ωХКТms Лв tСО ЛuвОr Пor pСвsТМКХ НОПОМts КrО tТmОάЛКrrОН
КПtОr К pОrТoН oП onО вОКr Пrom НОХТvОrв to tСО ЛuвОrέ TСТs
НoОs not КppХв to МХКТms Лв tСО ЛuвОr Пor ТnНОmnТiМКtТon Тn
КММorНКnМО аТtС §§ ζικ, ζιλ ψύψ (ύОrmКn όОНОrКХ δКа
Gazette).
АО sСКХХ onХв ЛО ХТКЛХО Пor МХКТms КrТsТnР Пrom К аКrrКntв
ПurnТsСОН Лв us ТП tСО quКХТtв or НurКЛТХТtв аКrrКntв СКs ЛООn
ПurnТsСОН Лв usО Тn аrТtТnР КnН usТnР tСО tОrm „АКrrКntвįέ
TСО аКrrКntв sСКХХ ЛО voТН ТП НКmКРО Тs НuО to ТmpropОr usО
КnН ТП tСО НОvТМО СКs ЛООn tКmpОrОН аТtС Лв unКutСorТsОН
persons.
For more information please visit
www.weller-tools.com.