dji MAVIC PRO Manuel De L'utilisateur page 59

X2 Green Flashes Twice
Yellow Flashes Slowly
Warning
Fast Yellow Flashing
Slow Red Flashing
Fast Red Flashing
Red Flashing Alternatively
— Solid Red
Red and Yellow Flash Alternatively
Firmwares Update
Use DJI Assistant 2 or DJI GO app to update aircraft and remote controller. Follow the instructions
below to update the firmware through DJI Assistant 2:
1. Connect the aircraft to a computer with a USB cable.
2. Launch DJI Assistant 2 and login with your DJI account.
3. Select "Mavic Pro" and click on the "Firmware Updates" on the left panel.
4. Select the firmware version that you wish to update.
5. Wait for the firmware to be downloaded and firmware update will start automatically.
6. Reboot the aircraft after the firmware update is complete.
The firmware update will take around 15 minutes. It is normal that the gimbal go limp, aircraft
status indicator blinks abnormally and the aircraft reboots. Please wait patiently until the update
is complete.
There will be no sound prompts during the update.
Ensure the computer has access to the Internet.
Ensure the battery level is adequate for the Intelligent Flight Battery.
Do not disconnect the aircraft from the computer during firmware update.
Intelligent Flight Mode
Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and
Waypoints features to assist users to create professional shoots during the flight. Course Lock and Home
Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations.
Point of Interest, Follow Me and Waypoints mode enable aircraft to fly automatically according to the
pre-set flight maneuvers.
Safe to Fly (P-mode with Forward and Downward Vision
System but without GPS)
Safe to Fly (A-mode but No GPS and Forward and
Downward Vision System)
Remote Controller Signal Lost
Low Battery Warning
Critical Battery Warning
IMU Error
Critical Error
Compass Calibration Required
Mavic Pro User Manual
©
2016 DJI. All Rights Reserved.
59