Tolerance Check For Target Quantity - KERN and SOHN SFB 10K1HIP Mode D'emploi

7.7.2

Tolerance check for target quantity

Settings
 Press
and
 Press
until the display for entering the lower limit value
appears.
 Press
, the current setting will be displayed.
 To enter the lower limit, e. g. 75 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.
 Confirm input by
 Press
repeatedly until
 Press
, the current setting for the upper limit will be
displayed.
 To enter the upper limit, e. g. 100 items, press the
navigation buttons (see chap. 2.1.1); the currently enabled
digit will be flashing.
 Confirm input by
 Press
repeatedly until

Press and the current setting for the acoustic signal will
be shown.
 Select desired setting (no, ok, ng) by
 Confirm input by
SFB-BA-e-1625
at the same time in weighing mode.
.
is displayed.
.
is displayed.
.
.

33