Checking The Seal - Dovre 425CB Installation Et Mode D'emploi

differences and damage may occur. The appliances
undergo a visual inspection in the factory, that is to
say, the inspector looks at the surface for a period of
10 seconds from a distance of 1 metre.
Any damage that does not stand out is regarded as
OK. A special heat-resistant paint is supplied along
with the apparatus, with which minor damage caused
during transport can be touched up.
Apply the heat-resistant paint in thin layers and leave
to dry well before using the appliance.

Checking the seal

Check whether the sealing rope of the door is still
in good condition and works well. The sealing rope
is subject to wear and needs to be replaced in time.
Check the appliance for air leaks. Close any
chinks with stove sealant.
Let the sealant harden fully before you start a
fire in the appliance, because otherwise any
moisture in the sealant will form bubbles in the
sealant and cause a new air leak.
Subject to change because of technical improvements
15