Floor And Walls; Product Description; Features Of The Appliance - Dovre 425CB Installation Et Mode D'emploi

Floor and walls

The floor on which the appliance is placed must have
sufficient load bearing capacity. For the appliance
weight: see the appendix "Technical data".
Protect a flammable floor from heat radiation
by means of a fireproof protective plate. See
the appendix "Distance from combustible
material".
Remove combustible material such as
linoleum, carpets/rugs and similar materials
below the fireproof protective plate.
Keep enough distance between the appliance
and combustible materials such as wooden
walls and furniture.
The connecting tube radiates heat too. Ensure
that there is sufficient distance or a shield
between the connecting tube and combustible
material.
The rule of thumb for a single-walled tube is a
distance of 3x the diameter. If a lining shell is
fitted around the tube, a distance of 1x the
diameter is permissible.
Carpets and rugs must be at least 80 cm away
from the fire.
Protect a flammable floor from possible falling
ash in front of the fire with the aid of a fireproof
protective plate. The protective plate must
comply with national standards.
For the dimensions of the fireproof protective
plate: see the appendix "Distance from
combustible material".
For further requirements in connection with fire
safety: see the appendix "Distance from
combustible material".
6

Product description

1. Secondary air slide
2. Door
3. Adjustable leg
4. Primary air slide
5. Fire basket
6. Bolt

Features of the appliance

The appliance is supplied with height-adjustable
legs.
The appliance can be connected to the chimney at
the rear or at the upper side.
The appliance is suitable for the burning of wood.
The appliance is supplied with a scraper for
removing excess ash.
The appliance is supplied with a detachable
handle, the so-called "cold hand", in order to
Subject to change because of technical improvements