Publicité
DISMOUNT THE FRONT FRAME
See attachment's owner's manual (snowblower, rotary
broom and utility blade) for dismounting instructions.
WARNING
TO PREVENT INJURIES:
Park the machine on a flat surface.
Disengage the P.T. O.
Lower the attachment to the ground.
Apply parking brake.
Stop the motor and remove the ignition key.
Wait until all moving parts have stopped before
leaving the driver's seat.
a) Remove the counterweights if installed.
b) Disconnect the driveline.
c) Remove the attachment.
d) Disconnect the hydraulic hoses and put the dust
caps on the hydraulic couplers.
e) Disconnect the central drive shaft.
f) Remove the front frame by pulling the knobs, lift
and pull towards the front.
DISMOUNTING
20
Publicité
