Publicité
ASSEMBLY
Install the bearing (item 1) onto the shaft on the front
side of axle.
Install a small retaining ring (item 2) and the big retaining
ring (item 3).
Install bearing and retaining rings
Lightly grease the lip of the seals (item 1) and install the
seals into the front and back.
The seals must be even with the axle.
Make sure the shaft rotates freely.
Install seals
Install the front frame (item 1) on the tractor's frame.
Pull the knobs (one on each side) (item 2) and hook
the front frame on the hooks (item 3). Release the
knobs.
Make sure the pins are well entered into the holes
(item 4).
Install front frame
10
Publicité
