Publicité
Removing the oven door
Replacing the oven lamp
1. Open the front door (1).
2. Open the clips at the hinge housing (2) on
,
Before replacing the oven lamp, make
the right and left hand sides of the front door
|
sure that the product is disconnected
by pressing them down as illustrated in the
from mains and cooled down in order to
avoid the risk of an electrical shock.
Hot surfaces may cause burns!
The oven lamp is a special electric light bulb
ithat can resist up to 300 °C. See Technical
8 specifications, page 11 for details. Oven
lamps can be obtained from Authorised
Service Agents.
Position of lamp might vary from the figure.
If your oven is equipped with a round lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter clockwise to
remove it.
3 Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4. Install the glass cover.
3 Move the front door to half-way.
4, Remove the front door by pulling it upwards
to release it from the right and left hinges.
#
51205 carried out during removing process
should be performed in reverse order to
install the door. Do not forget to close the
clips at the hinge housing when reinstalling
the door.
26/EN
Publicité
