Publicité
Drilling in metal
Use a cutting lubricant when drilling metals. The exceptions
are cast iron and brass which should be drilled dry. The
cutting lubricants that work best are sulfurized cutting oil
or lard oil.
LED work light
When drill is activated by pulling the trigger switch (1), the
integrated LED work light (8) will automatically illuminate
the work area.
Note: The work light is for lighting the immediate work
surface and is not intended to be used as a flashlight.
Bit tip storage
A bit storage slot (9) is built into the base of the tool.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
@
Important! To ensure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed by
authorized service centers or other quali-
fied organizations, always using identical
replacement parts. Unit contains no user
service able parts inside.
ACCESSORIES
@
Warning! Since accessories, other than
those offered by STANLEY have not been
tested with this product, use of such acces-
sories with this tool could be hazardous.
To reduce the risk of injury, only STANLEY
recommended accessories should be used
with this product.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY prod-
uct needs replacement, or if it is of no further use
to you, do not dispose of it with household waste.
Make this product available for separate collection.
STANLEY provides a facility for the collection and
recycling of STANLEY products once they have
reached the end of their working life. To take
All manuals and user guides at all-guides.com
advantage of this service please return your product to any
authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local STANLEY office at
the address indicated in this manual. Alternatively, a list
of authorised STANLEY repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
♦ Run the battery down completely, then remove it from
♦ NiCd, NiMH and Li-Ion batteries are recyclable.
REMARKS
Stanley's policy is one of continuous improvement to our
products and as such, we reserve the right to modify product
specifications without prior notice.
♦ Standard equipment and accessories may vary by
♦
♦
ENGLISH
BATTERIES
STANLEY batteries can be recharged many times.
At the end of their useful life, discard batteries with
due care for our environment:
the tool.
Take them to any authorized repair agent or a local
recycling station.
country.
Product specifications may differ by country.
Complete product range may not be available in all
countries. Contact your local Stanley dealers for range
availability.
(Original instructions)
11
Publicité
