Publicité
ELECTRONIC REMOTE CONTROL (Optional) (1 of 2):
TECHNICAL SPECIFICATIONS
- Powered by an alkaline battery: 12V mod.27A
- Frequency used: 433.92 MHz
- Combinations: 32.768
OPERATION
The transmitter has 5 keys to control the operation of the hood, specified below:
: Light ON/OFF switch.
: ON (1st speed) OFF motor switch.
: * Reduce speed. (* Only to
2nd speed to return to 1st speed
press the OFF/ON button)
: Increase speed.
: 5 or 10-minute timer, depending on version.
Note: If you have a motor version that exceeds 650m³/h, 3rd or 4th speed will be timed (*see Ecodesign
Timer section, Page 14).
OPERATION MODES Standard configuration:
Factory-set configuration establishes that all the "hood- remote control" systems have the same transmission
code. If you install two "hood- remote control" systems in the same room or near each other, as they have
the same transmission code, they may affect the other, it is therefore necessary to change the code of one of
the remote controls.
Generating a new transmission code:
The remote control is supplied with predefined codes. If you wish to generate new codes, do the following:
1) Press the following keys continuously for 2 seconds, until all the LEDs on the remote control light up
steadily.
2) While these LEDs are still on (they will only be on for about 5 seconds, make sure you do this
operation before they turn off, otherwise you will have to repeat step 1), press the following keys on
the remote control successively and the LEDs on them will flash 3 times:
All manuals and user guides at all-guides.com
- Max. consumption: 25 mA
- Working temperature: -20 ÷ + 55 °C
- Dimensions: 130x45x15mm.
LED lights indicating
functions.
Publicité
