Publicité
ANNEX 12:
FIRST POWER UP AND STARTING UP OF THE HOOD
Once the hood has been installed and it has been connected to the power supply, connect the
main switch of the connection box and synchronise the remote control, the process of which is
detailed below:
* Remote control Synchronisation with hood:
1.- Disconnect differential from the house or circuit box switch that powers the hood (OFF).
2.- Reconnect differential from the house or circuit box switch that powers the hood (ON).
3 .-IMPORTANT!: Once step 2 has been carried out
toward the hood,
press or hold down the * LIGHT key on the control. The main hood lights
will turn on, meaning that the remote control code has already been registered by the
hood and is already synchronised.
IMPORTANT!!! –
(Once started up, follow the instructions for synchronisation of the remote control)
* Switch position detail as seen in installation step 11
* The synchronisation of the remote control with the hood can be lost if the synchronisation
process is not properly carried out within 20 seconds after start up, by power outages or
electrical variations of the network, causing the hood to not respond to the orders of the remote
control, and it will need to be synchronised once again.
All manuals and user guides at all-guides.com
* REMOTE CONTROL SYNCHRONISING
within 15 seconds,
with the remote control
light key
light key
Publicité
