Publicité
5. ASSEMBLY INSTRUCTIONS
STEP 2
33
25
46
24
26
48
46
23
1.
Attach the seat tube (20) to the vertical standpipe (2). Secure with 2 sets of bolts (1k),
washers (2d) and nuts (3d).
2.
Attach the leg extension mount (26) to the seat tube (20). Secure with 1 screw (1m), washer
(2d) and nut (3d) each.
3.
Connect the biceps padding (33) to its support frame (25). Secure with 2 sets of bolts (1c)
and washers (2c).
Using the biceps padding: Insert the biceps padding into the leg extension mount (26).
4.
To do so, remove the (48) round head grooved pin first. Reattach the pin after installation
of the biceps padding.
5.
Install the cross braces (23, 24) and leg paddings (46).
6.
Attach the back cushion (28) to the vertical standpipe (2) and the seat cushion (29) to the
seat tube (20). Secure with 2 sets of bolts (1a) and washers (2d) each.
SP-HG-015-IM-02-DE+GB+FR.indb 37
All manuals and user guides at all-guides.com
3d
2d
46
28
2C
29
1C
3d
2d
20
2d
1a
1m
2d
1a
37
1a
2d
2
2d
1a
1k
2d
46
15/6/2016 18:24
Publicité
