Scope Of Supply; Warning Information - Weller WFE 35 Manuel D'utilisation

5 36 323 99 Tube DN40 (2m)
5 36 324 99 End cap DN40
5 36 326 99 Extension hose DN17 (5m)
5 36 329 99 Pipe clamp DN40
5 36 344 99 Branch piece 2 x 90° DN40
5 36 338 99 Hose connector for single hose
5 36 343 99 Hose connector for extension hose DN17
5 87 351 42 Screw-in nipple DN17G3/8"
5 87 351 44 Nut G3/8"
5 36 345 99 Clamp holder for extraction arm
5 36 347 99 Extraction arm for bench assembly
5 36 348 99 Extraction arm for bench assembly, ESD-safe
5 36 349 99 Shade, pe-transparent, 256 x 248mm
5 36 350 99 Shade, pe-transparent, 385mm ø
5 36 351 99 Extraction nozzle, 50mm ø 230mm
5 36 352 99 Locking clip for FE-iron
5 36 414 00 Flex tube NW44 per meter
5 36 415 00 End cap NW44
55 36 329 99 Befestigungsklemme DN40

6. Scope of supply

The WELLER WFE35 is equipped with:
1 expanded metal condensation filter
1 fine particulate air filter
1 Class S submicron particulate air filter in accordance with DIN 24 184
1 wide band gas filter - 50% activated carbon, 50% Purafil for the extraction of soldering
fumes.
Illustration: wiring diagram - see page 50

7. Warning information

1. Keep your working area tidy.
Untidiness in the working area can result in accidents.
2. Take account of environmental influences.
Do not expose the power tool to rain. Do not use power tools in damp or wet
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
environments. Ensure that lighting is good. Do not use the power tool near flammable
liquids or gases.
3. Protect yourself against electric shock.
Avoid touching parts of the body with earthed components, e.g. pipes or heating
elements.
4. Keep children away.
Do not let other people touch the power tool or the cable. Keep other people away
fromyour working area.
5. Store the power tool safely.
Power tools which are not in use should be stored in a dry and sealed-off location,
outside the reach of children.
6. Do not overload the power tool.
You will work better and more safely within the stated power range.
7. Use the correct power tool.
Do not use machines which have insufficient power for heavy-duty tasks. Do not use
the power tool for purposes for which it is not designed.
8. Wear suitable working clothes.
Do not wear any wide clothing or jewellery; you could be trapped by movable parts.
Wear appropriate protective clothing to guard against burns. There is a risk of burning
by liquid solder.
9. Protect your eyes.
Wear protective goggles. When handing adhesives, special attention must be paid to
the warning information given by the adhesive manufacturer. Protect yourself against
splashes of solder. There is a risk of burning by liquid solder.
10. Use the soldering fume extraction device suited to the work location.
If appliances for the connection of soldering fume extraction devices are available,
satisfy yourself that these are in perfect condition and that they are being used correctly.
22