Accessories; Scope Of Supply - Weller WSD 121 Mode D'emploi

The setback time can be set at 0-99 minutes after the
soldering station has switched to standby mode.
After a period equal to three times the set-back time, the
"Auto Off" function is activated. The soldering iron is
switched off (flashing dash on the display).
Lock:
Locking the setpoint temperature. Settings cannot be
changed after the soldering station has been locked.
°C/°F:
Switching the temperature display from °C to °F, and vice
versa.
Window:
Limitation of the temperature range to max. ± 99°C based
on a locked temperature resulting from the "LOCK"
function. The locked temperature represents the median
point of the adjustable temperature range.
Cal:
Re-adjustment of the soldering station (WCB 2 only).
PC interface:
RS232 (WCB 2 only).
Temp. gauge:
Integrated temperature gauge for thermal element Type K
(WCB 2 only).

7. Accessories

T005 29 193 99 Soldering Iron WP 120
T005 29 161 99 Soldering iron set WSP 80
T005 29 180 99 Soldering Iron WP 80
T005 33 131 99 Soldering iron set MPR 80
T005 29 187 99 Soldering iron set LR 21, antistatic
T005 29 188 99 Soldering iron set LR 82
T005 33 133 99 Soldering iron set WTA 50
T005 27 028 99 Preheating plate WHP 80
T005 27 040 99 Soldering bath WSB 80
T005 25 032 99 Thermal insulating unit WST 82KIT1
T005 25 031 99 Thermal insulating unit WST 82KIT2
T005 31 180 99 External input unit WCB 2
T005 29 179 99 Soldering iron set WMP

8. Scope of supply

WSD 121
Control unit
Soldering iron WP 120
Power cable
Soldering iron rest
Jack
Operating instructions
Safety Information
Illustration: Circuit diagram, see Page 19
Illustration: Exploded view, see Page 20
Subject to technical alterations and amendments!
See the updated operating instructions at
www.weller-tools.com.
English
6